Fits 1967-1974 Camaro, 1965-1974 Chevy Full Size, 1964-1974 Chevelle/El Camino, 1970-1974 Monte Carlo, 1968-1974 Nova, 283-400ci Small Block Chevy, 1.625" Primary Tube x 3.00" O.D Collector Size
Hooker Competition headers offer the best value in the high performance header market. Designed for the value-conscious buyer, Hooker Competition headers offer premium features at a very competitive price. Made of durable 304 stainless steel tubing, the Hooker Competition header design utilizes a long transition collector to reduce back pressure and increase exhaust flow. A perfect sealing surface is assured with the 5/16" machined flanges. Experience has proven that this flange size is ideal to maintain header integrity and be pliable enough to seal each exhaust port. Tubing is mandrel-bent to maintain metal strength and provide consistent tube diameter at radii to maximize performance. Hooker Competition headers have a standard finish that features a heat-cured, high-heat-resistant paint. Optionally, the famous Hooker Ceramic Thermal Barrier Coating is available.
This header is designed to fit multiple vehicle applications. As such, the collectors exit at two different heights in order to accommodate them all. If you are looking for a header with more available ground clearance, please check out part number 2466HKR or the Super Competition header designed specifically for your vehicle. Factory style motor mounts must be used to ensure proper engine locations and header fit. Aftermarket solid and urethane mounts, worn or incorrect mounts will cause header fitment issues. If you have floor pan clearance issues on the pass side header, check your sub-frame mounts. This header will not fit with close ratio steering box or rack conversions. Lowered ride height may result in insufficient ground clearance Check (2466HKR or Super Competition header for your vehicle). This header was designed around the factory small block engine with factory heads. Raised port heads, D-port heads or non-stock plug locations may cause gasket leaks and header fitment issues that require modification to fit. This header will not work with angle plug heads.
Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Hooker Competition headers offer the best value in the high performance header market. Designed for the value-conscious buyer, Hooker Competition headers offer premium features at a very competitive price. Made of durable 304 stainless steel tubing, the Hooker Competition header design utilizes a long transition collector to reduce back pressure and increase exhaust flow. A perfect sealing surface is assured with the 5/16" machined flanges. Experience has proven that this flange size is ideal to maintain header integrity and be pliable enough to seal each exhaust port. Tubing is mandrel-bent to maintain metal strength and provide consistent tube diameter at radii to maximize performance. Hooker Competition headers have a standard finish that features a heat-cured, high-heat-resistant paint. Optionally, the famous Hooker Ceramic Thermal Barrier Coating is available.
- 5/16” machined flanges for a perfect seal
- Long transition collector for decreased back pressure
- Light weight & sturdy 16 gauge tubing
- Mandrel-bent tubing for smooth exhaust flow
- Tuned-length primary tubes for better performance
- Industry’s best welds for durability
- designed for easy, trouble-free fit
- All necessary hardware included for a complete installation
- Works with factory power steering and power brakes
Information:
NOTE: Installation requires air conditioning bracket Part #10925HKR left side or Part #10926HKRright side.This header is designed to fit multiple vehicle applications. As such, the collectors exit at two different heights in order to accommodate them all. If you are looking for a header with more available ground clearance, please check out part number 2466HKR or the Super Competition header designed specifically for your vehicle. Factory style motor mounts must be used to ensure proper engine locations and header fit. Aftermarket solid and urethane mounts, worn or incorrect mounts will cause header fitment issues. If you have floor pan clearance issues on the pass side header, check your sub-frame mounts. This header will not fit with close ratio steering box or rack conversions. Lowered ride height may result in insufficient ground clearance Check (2466HKR or Super Competition header for your vehicle). This header was designed around the factory small block engine with factory heads. Raised port heads, D-port heads or non-stock plug locations may cause gasket leaks and header fitment issues that require modification to fit. This header will not work with angle plug heads.
Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Application Summary:
| Year | Make/Model |
|---|---|
| 1965-1974 | Chevrolet Bel Air |
| 1965-1972 | Chevrolet Biscayne |
| 1969-1972 | Chevrolet Brookwood |
| 1967-1974 | Chevrolet Camaro |
| 1966-1974 | Chevrolet Caprice |
| 1964-1974 | Chevrolet Chevelle |
| 1968 | Chevrolet Chevy II |
| 1964-1974 | Chevrolet El Camino |
| 1969-1970 | Chevrolet Estate |
| 1965-1974 | Chevrolet Impala |
| 1969-1972 | Chevrolet Kingswood |
| 1970-1974 | Chevrolet Monte Carlo |
| 1969-1974 | Chevrolet Nova |
| 1969-1972 | Chevrolet Townsman |
| 1971-1974 | GMC Sprint |
| Attributes | |
| Air Injection Tubes | No |
| Application | Automotive |
| ASIN | B000LXUXFS |
| Bolt size | 3/8-16 x 3/4, 3/8-16 x 3/4 |
| Bolts Included | Yes |
| Brand | Hooker, Hooker |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant | No, No |
| Category | Exhaust, Exhaust |
| Coated Finish | Stainless Steel |
| Coating/Finish | Stainless Steel |
| Collector Attachment | 3-Bolt Flange, 3-Bolt Flange |
| Collector Diameter | 3.000 in., 3.00 inch |
| Collector Diameter (in.) | 3.00 |
| Collector Reducer Included | No |
| Collector Tube Size | 2.500 in. |
| Collector Tube Size (in.) | 2.5 |
| Color | Silver, Silver |
| Country of Origin (Primary) | CN |
| Cylinder Head Flange Thickness | 5/16, 5/16 |
| Design | Long Tube, Long Tube |
| Drive | 2WD, 2WD |
| EGT (Exhaust Gas Temperature) Port | No, No |
| Emission Code | 4, 4, Off Road |
| Engine | Chevrolet Small Block Gen I, Chevrolet Small Block Gen I |
| Engine Make/Size | Chevy Small Block |
| Finish | Natural, Natural |
| Gasket Or Seal Included | Yes, Yes |
| Grade Type | Performance, Performance |
| Harmonized Tariff Code (Schedule B) | 8708925000 |
| Hazardous Material Code | N |
| Head Style | Long-Tube |
| Header Finish | Natural, Natural |
| Header Flange Thickness | 5/16 inch, 5/16 inch |
| Header Flange Thickness (in) | 5/16 inch |
| Header Series | Competition, Competition |
| Header Style | Long Tube, Long Tube |
| Life Cycle Status Code | Available to Order |
| Material | Stainless Steel, 304 Stainless Steel |
| Mounting Hardware Included | Yes, Yes |
| NAFTA Preference Criterion Code | B |
| Oxygen Sensor Port | No, No |
| part type | Exhaust Header, Exhaust Header |
| Port Shape | Same As Port/Can Be Matched, Oval |
| Primary Tube Dia. | 1-5/8 inch, 1-5/8 inch |
| Primary Tube Diameter | 1.625 in. |
| Primary Tubing Diameter | 1-5/8, 1-5/8 |
| Product Type | Header, Headers |
| Quantity | Sold as a pair, Sold as a pair |
| Sale Category | Exhaust |
| SDR Required Flag | N |
| Sub Category | Exhaust Manifolds, Exhaust Manifolds |
| Tube Diameter | 1.625 in. |
| Tube Direction | Down Swept |
| Tube Material | 304 Stainless Steel, 304 Stainless Steel |
| Tube Size | 1.625 |
| Tube Wall Thickness | 16 |
| Warning | California Proposition 65, California Proposition 65 |
| Warranty Time | 90 |
| GTIN | 00090127596128 |